Tyreseal Grade 3 Extreme 20 Litres Drum
Tyreseal Grade 3 Extreme 20 Litres Drum
Extreme Tyre sealant is used for On Road and Off Road vehicles.
For commercial vehicles only.
This drum will do around 7-8 vehicles. Depending on the size of the tyres.
Especially manufactured for commercial vehicles which are running mainly on road but occasionally off road picking larger objects than 10mm.
Pump needed for drum at the price of £60.
It is much easier and convenient to buy a drum and pump over bottles.
Free UK Delivery
Contact Head Office for International Delivery Orders
Tyre Valve remover and size chart will be provided on all orders.
Instructions with using a Tyreseal pump:
1. Using a Tyre Valve remover, remove the Tyre Valve. You do not need to let all the air come out.
2. Insert the Tyreseal pump which is connected to the 20 litre drum in the Tyre Valve area. Make sure the Tyreseal pump is unlocked correctly by turning the black switch to the side.
3. Using the size chart, pump the right amount of Tyreseal. Each pump from the top to the bottom is 100ML.
4. Disconnect the Tyreseal pump and reinsert the Tyre Valve.
5. Top up the air which was slightly lost during the installation.
Instructions with using a bottle:
1. Using a Tyre Valve remover, remove the Tyre Valve and let all the air out.
2. Once all the air is out, pull the top bottle lid until it is fully extended with the inserter.
3. Using the size chart, squeeze the right amount of Tyreseal using the Tyreseal bottle inserter.
4. Disconnect the Tyreseal bottle inserter and reinsert the Tyre Valve.
5. Top up the air which was lost during the installation.
To manually insert Tyreseal without using a pump or bottle. You will have to take the tyre out including the rim and pour in the sealant inside the tyre making sure the correct amount of sealant goes in using the size chart then put the tyre back in.